How to Enable WPS Button on Spectrum Router: Expert Guide

When you enable the WPS button on your router, you can get several benefits. In this guide, let’s find out how to enable the WPS button on Spectrum router and discover other related things.

What is the WPS Button on Spectrum Router?

WPS is a wireless network security standard that connects a device and router. It only works for wireless networks that follow security protocols. Most Spectrum routers come with WPS buttons. When you enable the WPS button, you can add an extra layer of security to the system.

Reasons to Enable WPS Button on Spectrum Router

There are several reasons for enabling the WPS button on a Spectrum router. The best thing is that you don’t have to use a Wi-Fi network password or SSID. Instead, just press the WPS buttons, and they will pair automatically. Besides that, it will provide an additional layer of security for the system.

How to Enable WPS Button on Spectrum Router

If you have a standard Spectrum router, you have to follow some simple steps to enable the WPS button. Let’s find out how to do it:

Step 1: First, find the WPS button, which is usually located on the back of the router.

Step 2: Once you find the WPS button, press and hold the button for a few seconds. Soon, you will find the light turning on.

Step 3: After that, check the status of your Spectrum router. You can also check the router status from the admin panel.

Spectrum Router Without WPS Button

Sometimes, you can’t find the WPS button on your Spectrum router. In this case, you can access the button by using a web browser. Follow these steps to enable your network:

Step 1: First, connect your device to a stable Wi-Fi network. It’s better to use an Ethernet cable for more reliability.

Step 2: After that, open the default IP address of the router or search the model number.

Step 3: Next, log into the dashboard by providing your username and password.

Step 4: Once you are on your dashboard, go to the Basic Setup option.

Step 5: Locate the checkbox next to the WPS section and enable it.

Step 6: After that, enable PBC or PIN-based entry to complete the process.

How to Configure WPS Connections on Spectrum

If you are done with enabling the Push-button Connection on WPS, follow these steps to configure WPS connections on Spectrum:

Step 1: Start your WPS-enabled device by powering it on.

Step 2: From your smartphone, select a Wi-Fi network from the available options.

Step 3: After that, enter your password and press the WPS button on your router. If your router has a WPS button, press these two buttons at the same time.

Step 4: Now, follow the given instructions, like providing the WPS PIN, to connect it to your network.

Not Able to Enable the WPS Button – What to do?

If you are unable to enable the WPS button, you can try out some alternative options. Keep reading the following section to explore more:

• Software Method: If you can’t enable the WPS button on the router, you can try out the software method. You can implement this process by logging into the router management dashboard.

• Restart The Router: Another good alternative is restarting the router. It will refresh the WPS module and prepare it to pair with other devices.

• Power Cycle The Router: Besides these things, you can also power cycle the router. Here, you have to disconnect all the cables from your router and wait for 30 seconds to connect these cables.

Conclusion

It’s quite easy to enable the WPS button on Spectrum router. If you are unable to do this, try out some alternative methods. If your router doesn’t have a WPS button, you can also enable the function by using a web browser from your smartphone.

FAQs